Simyke Upgrade Video Baby Monitor with 2 Cameras and Audio 2.8″ Screen,Night Vision,APP,Wireless,2-Way Talk,1200ft Long Range,Feeding Timer,Temperature Sensor,VOX/ECO,5 Lullabies,Portable,Easy Setup

Product description

Precautions – Problems with the Use of Baby Monitors

Simyke Baby Monitor Factory Defaults to VOX Mode

When no sound is detected, the display will turn off to enter power saving mode, and when sound is detected, the display will light up to remind you.

Tips: When you receive the monitor to use, enter the VOX power saving mode, this is not the baby monitor is broken, if you do not like this function can manually cancel.

FAQs & Troubleshooting

My baby monitor is not working normally or is performing erratically.

1: Confirm proper installation power supply is securely plugged in. You should only use the Simyke power supply provided with your baby monitor. Make sure the electrical outlet is working and not controlled by a wall switch.

2: Make sure the parent unit and baby camera are turned on. Make sure that the blue light on the back of the camera is on.

3: The parent unit may be too far away from the baby unit. Or, other equipment or devices in your house may be affecting the connection between your parent unit and baby unit(s). Try placing the parent unit at least 3 feet away from WiFi devices, including laptops, smartphones, router, tablets and other WiFi streaming devices. Then, try to move your parent unit around (e.g. closer to baby unit or away from Wi-Fi devices) to find better reception. When placing the units closer together; note that they should not be closer than 3 feet apart.

4: Try resetting the parent and baby unit:

Step 1. Disconnect the power to the baby unit and parent unit.

Step 2. Wait approximately 15 secs.

Step 3. Reinstall adapter to the baby and parent unit.

Step 4. Wait one minute for the baby device and parent device to reconnect.

*Noise static and other erratic performance may be caused by nearby

electronic equipment and other cordless devices using the same frequency.

Separate your baby monitor from these devices as much as possible.

Unable to scan QR code to connect to network

First you need to check the following issues:

1) Whether the baby camera is properly plugged in and turned on

2) Whether the baby camera enters the network Pairing mode normally

3) Whether the app side can normally generate the correct QR code screenshot

4) Whether the camera prompts successful code scanning

5) Can not read the QR code prompted what

6）What is the specific tip of not being able to connect to the network

7) Whether the router is a 5G frequency band (currently only supports 2.4G WiFi)

All of the above may lead to the device can not be normal with the network.

If the baby camera can scan the code normally, but can not connect to the network prompts network connection timeout, you need to confirm whether the router is 5G or the phone’s QR code is correct.

If you confirm that you have entered the Pairing mode and keep reminding the code scanning timeout, try restarting the baby camera and re-enter the Pairing mode to scan the code.

What’s in the Box

2 x Baby Camera

1 x Baby Monitor

1 Set Power Adapter

1 Set Power Adapter

1 Set Power Adapter

1 x User Manual

Warm Tips Simyke baby monitor only supports 2.4 GHz Wi-Fi,Does not support 5G Wi-Fi. If your home WiFi does not 2.4Ghz, please buy with caution.

Two Way Baby Monitor

Talk to your little baby anytime you want. ( Note: Hold down the talk button for 3 seconds and start talking. Baby can hear your voice clearly from the camera )

5 Lullabies for You

Wireless baby camera monitor with 5 lullabies, you can play music and white noise to sooth your baby, soothing music can help your baby fall asleep.

Baby Monitor with Night Vision

You can see your little one clearly at night, and a sound baby monitor lets you hear your baby’s voice and know that your baby is sleeping well at night.

Long Range Baby Monitor

1200ft supper long connection range, Even if you are in the yard, you can check the condition of the baby in the baby room through the screen or app.

Up to 4 Cameras

This double baby monitor with 2 cameras and 1 IPS screen, 1 screen can up to 4 cameras, you can see 4 different rooms.

VOX Power-saving Mode

When the baby camera detects that the baby’s voice is higher than 60db, the screen will automatically light up; When the sound is below 60db, it goes into power-saving mode.

More Useful Features

ABS+PC
Video Baby Monitor wth 2 Cameras — Simyke 2 cameras video baby monitor system allows you to easily monitor your children’s every move during the day and night. Up to 1200ft of range, you can connected with each child, saves you a lot of headaches.
Two Way Audio — The portable baby monitor Supports app and monitor control, hold down the talk button for 3 seconds to stay contact with your baby via the app and monitor, You can talk to baby at home or at work, baby can hear your voice clearly.
Night Vision with Lullabies — This baby cam has Automatic night vision function, you can see and hear your baby clearly in the night, The dual baby monitor has 5 lullabies to choose from and white noise can be better soothe your baby to sleep.
VOX Auto Wake-up Mode — Video baby monitors with camera and audio, The LCD screen will Auto-wakes the standby when detecting noise below 60db and save power. You can turn it off or change the sensitivity level of the VOX mode.
Easy Set-up — Baby monitor no wifi needed, plug & play,easy to use. Simyke baby monitor with app and screen, it also supports APP viewing, you need to be connected to 2.4Ghz WiFi to use long range baby monitor’s APP viewing function.
Increased Battery Capacity — The IPS Display is upgraded with a high capacity 2500mah battery, The display can be used for 6 hours with the screen on all the time, and you can use it for 10 hours in VOX power saving mode.